收藏本站
71M6543F/71M6543G Data Sheet
Table 66: GAIN_ADJn Compensation Channels ( Figure 2 , Figure 31, Table 1 )
Gain Adjustment Output
GAIN_ADJ0
GAIN_ADJ1
GAIN_ADJ2
GAIN_ADJ3
CE RAM Address
0x40
0x41
0x42
0x43
Sensor Channel(s)
(pin names)
VADC8 (VA)
VADC9 (VB)
VADC10 (VC)
IADC0-IADC1
IADC2-IADC3
IADC4-IADC5
Compensation For:
VREF in 71M6543 and Voltage Divider
Resistors
VREF in 71M6543 and Shunt
(Neutral Current)
VREF in 71M6xx3 and Shunt
(Phase A)
VREF in 71M6xx3 and Shunt
(Phase B)
IADC6-IADC7 VREF in 71M6xx3 and Shunt
(Phase C)
determined by the values stored in the PPMC (1 order coefficient) and PPMC2 (2
order coefficient),
given current-sensing channel (i.e., the 1 order PPMC coefficients are summed together, and the 2
GAIN_ADJ4 0x44
In the demonstration code, the shape of the temperature compensation second-order parabolic curve is
st nd
which are typically setup by the MPU at initialization time from values that are stored in EEPROM.
To disable temperature compensation in the demonstration code, PPMC and PPMC2 are both set to zero
for each of the five GAIN_ADJx channels. To enable temperature compensation, the PPMC and PPMC2
coefficients are set with values that match the expected temperature variation of the shunt current sensor
(if required) and the corresponding VREF voltage reference (summed together).
The shunt sensor requires a second order polynomial compensation which is determined by the PPMC
and PPMC2 coefficients for the corresponding current measurement channel. The corresponding VREF
voltage reference also requires the PPMC and PPMC2 coefficients to match the second order
temperature behavior of the voltage reference. The PPMC and PPMC2 values associated with the shunt
and with the corresponding VREF are summed together to obtain the compensation coefficients for a
st nd
order PPMC2 coefficients are summed together).
In the 71M6543F and 71M6543G, the required VREF compensation coefficients PPMC and PPMC2 are
calculated from readable on-chip non-volatile fuses (see 4.5.2 Temperature Coefficients for the
71M6543F ). These coefficients are designed to achieve ±40 ppm/°C for VREF in the 71M6543F and
71M6543G. PPMC and PPMC2 coefficients are similarly calculated for the 71M6xx3 remote sensor
(see 4.5.3 Temperature Coefficients for the 71M6xx3 ).
For the current channels, to determine the PPMC and PPMC2 coefficients for the shunt current
sensors, the designer must either know the average temperature curve of the shunt from its
manufacturer’s data sheet or obtain these coefficients by laboratory characterization of the shunt used
in the design.
4.5.5
Temperature Compensation of VREF and Current Transformers
This section discusses metrology temperature compensation for meter designs where Current
Transformer (CT) sensors are used, as shown in Figure 32.
Sensors that are directly connected to the 71M6543 are affected by the voltage variation in the 71M6543
VREF due to temperature. The VREF in the 71M6543 can be compensated digitally using a second-
order polynomial function of temperature. The 71M6543 features a temperature sensor for the purposes
of temperature compensating its VREF. The compensation computations must be implemented in MPU
firmware and written to the corresponding GAIN_ADJx CE RAM location.
Referring to Figure 32 , the VADC8 (VA), VADC9 (VB) and VADC10 (VC) voltage sensors are directly
connected to the 71M6543. Thus, the precision of the voltage sensors is primarily affected by VREF in the
71M6543. The temperature coefficient of the resistors used to implement the voltage dividers for the voltage
sensors (see Figure 27 ) determine the behavior of the voltage division ratio with respect to temperature. It is
recommended to use resistors with low temperature coefficients, while forming the entire voltage divider
using resistors belonging to the same technology family, in order to minimize the temperature dependency of
the voltage division ratio. The resistors must also have suitable voltage ratings.
The Current Transformers are directly connected to the 71M6543 and are therefore primarily affected by the
VREF temperature dependency in the 71M6543. For best performance, it is recommended to use the
90
v2
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
71M6545-IGT/F IC ENERGY METERING
720-10007-00300 CBL D-SUB 9PIN FMAL-25PIN FML 3M
720-10010-00025 CBL DSUB 9PIN FML-25PIN MAL .25M
720-10020-00300 CBL DSUB 9PIN FML-9PIN MALE 3M
720-10021-00300 CBL DSUB 9PIN FML-9PIN FEMAL 3M
72231-0881 8 POS T/P SHLD 4 GR ASSY
7250B PANEL KIT BOTTOM FOR R-1220 CASE
731-10061-00200 CBL DSUB HD 15FEMAL-15MALE 2.0M
相关代理商/技术参数
71M6543F-IGTR/F 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6543FT-IGT/F 制造商:Maxim Integrated Products 功能描述:ENERGY METER ICS - Rail/Tube
71M6543FT-IGTR/F 制造商:Maxim Integrated Products 功能描述:3-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Tape and Reel
71M6543G 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Selectable Gain of 1 or 8 for One Current Energy Meter ICs Metrology Compensation
71M6543GH 制造商:未知厂家 制造商全称:未知厂家 功能描述:电表IC
71M6543GHT-IGT/F 制造商:Maxim Integrated Products 功能描述:3-PHASE, 128KB, PRES TEMP SENSOR, HI PREC - Bulk
71M6543GHT-IGTR/F 制造商:Maxim Integrated Products 功能描述:3-PHASE, 128KB, PRES TEMP SENSOR, HI PREC - Tape and Reel
71M6543G-IGT/F 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel